How to use glasses

Before starting:

- Check the battery level: Hold down the on/off button. If the power doesn´t turn on, charge it for 2 hours to ensure a full charge.

Controls:

- On/Off button: Also functions as a Mode Switch, allowing you to select 2 different modes.

- Plus/Minus button: Enables you to choose 3 different levels of intensity.

Usage instruction:

1. Preparation: Before using the device, apply a small amount of eye cream, serum or gel around the lower eyelids. This is essential to maintain skin moisture and enhance conductivity. If you notice a reducement of current sensation during use, reapply the product of choice sparingly.

2. Contact: Make sure the device is in full and firm contact with your skin during use. If you notice the contact lessening during use, gently press it against the skin again for improved conductivity.

3. Adjustment for even current: If the current is felt on only one side, adjust the device to fit more snugly, similar to how you would adjust a regular pair of glasses. A proper fit ensures an even distribution of the current across both eyes.

4. Powering on and mode selection: 

- Press the On/Off-Mode button for 1.5 seconds to turn on the device.
- The initial mode will deliver frequent, short pulsations through Microcurrent technology.
- Press the On/Off-Mode button again to switch to a less frequent, longer pulsation mode utilizing Electromuscular technology.
- Feel free to switch modes every 1-2 minutes for a varried routine.

5. Adjusting intensity: The device starts at the lowest intensity level, indicated by one light. Use the Plus/Minus button select the level of desired intensity.

6. Treatment duration: Limit your sessions to no more than 10 minutes and do not use the device more than 2 times a day.

7. Powering off: Press the On/Off button for 1.5 seconds to turn off the device.

8. Automatic shutdown: The device features an automatic shutdown which kicks in after a countinuous use of 10 minutes.